Oumier Wasp Nano Cartridge V2 0.4 Ohm

Wasp Nano Cartridge V2 0.4 Ohm Overview

The Wasp Nano Cartridge V2 is an Oumier refill pod with a 0.4 Ohm mesh coil built in, a 2ml tank and top filling, made for the Wasp Nano series. Rs 799 is the price of one cartridge, and it is rated for 26 to 30W.

The box carries the “Bolder Sensation” line. This listing comes in a single resistance, 0.4 Ohm, so there is no option to pick.

Features and Specs

• Resistance: 0.4 Ohm, coil built into the cartridge
• Coil type: mesh
• Power range: 26 to 30W
• Capacity: 2ml
• Filling: top fill

Wasp Nano Cartridge V2 Compatibility

Oumier lists this cartridge as compatible with the full Wasp Nano series: the Wasp Nano X, Wasp Nano X 2.0, Wasp Nano X 3.0 and Wasp Nano Pod V2.

Because 0.4 Ohm needs 26 to 30W, it runs best on the Wasp Nano X 2.0 and 3.0, which reach that power. The original Oumier Wasp Nano X has no wattage setting and ships with a 0.8 Ohm cartridge. The 0.4 Ohm cartridge does fit it, but the 0.8 Ohm cartridge is the usual match for the original Nano X. See more Oumier products or our coils and cartridges section.

Which E-Liquid to Use and Coil Tips

At 0.4 Ohm and 26 to 30W this cartridge leans towards a looser, more airy draw, so lower strength freebase e-liquid (3 to 6mg) is a common pick, as it is for coils below 0.4 Ohm. Strong nic salts are better kept for higher resistance coils; our nic salt guide explains the difference.

• Prime each new cartridge: fill it, then wait 5 to 10 minutes.
• Start at the low end of 26 to 30W and step up.
• Swap the cartridge once the taste turns burnt.

More help is in our replacement pods guide.

Price in Pakistan and Delivery

The Wasp Nano Cartridge V2 price in Pakistan is Rs 799 for one cartridge. Oumier packs them as a pack of 3; change the quantity to 2, 3 or 4 to stock up.

We deliver all over Pakistan with cash on delivery. Delivery is a flat Rs 350 and orders usually arrive in 3 to 5 working days. Our shop is in Sabzazar, Lahore, and all stock is 100% original. Sales are for adults 18+ only.

FAQ

Is this the 0.8 Ohm cartridge?

No. This listing is the 0.4 Ohm cartridge only.

Can I use it on the original Wasp Nano X?

It fits, but the original Nano X has no wattage control and comes with a 0.8 Ohm cartridge, which is the usual match for it. The 0.4 Ohm works best on the X 2.0 and 3.0.

How do I fill it?

It fills from the top. Leave a little space at the top and let the coil soak before vaping.